3.3.6 LIGHT SOURCE
3.3.6.1 LED LIGHT SOURCE
See the manual of the LED light source EVERLUX ECLERIS
3.3.7 COMPATIBLE ACCESORIES
LED Light source Everlux
Beam splitter
Converter
of
beam
splitter
to
endocoupler C-Mount
Digital photographic camera adapter
Binocular rotating ring
Long Pantographic Arm
Long fiber optic guide cable for
microscope with long pantographic
arm
Regular pantographic arm extension
Extension for a second assistant
30 cm Extension Device for Ceiling
Mounting Microscopes OM100C
Stand for LCD monitor
LCD monitor stand adapter for
ceiling-mounted microscopes
45º inclined Binocular
Straight Binocular
180º
Inclinable
Binocular
(Ergobinocular)
CCD Video Camera (NTSC/PAL)
Eyepieces 10X
200 mm Objective lens
250 mm Objective lens
300 mm Objective lens
400 mm Objective lens
Device Cover
Autoclavable
device
cover
kit
(handles and knobs)
Focal lens ring for plastic lens
protector
Plastic lens protector (15 unit pack)
Digital data capture system
– Ecleris
ENDODIGI
4. INSTALLATION AND SET UP
Additionally to the provided tools, for the installation of the floor-stand (OM-100F) you will need 13
mm and 27 mm wrenches or an adjustable wrench. For the Wall-Mounted Microscope (OM-
100W) you will also need an electric drill, a 12mm widia drill bit and
a 1/2’’ socket wrench. For the
Ceiling Mounted Microscope (OM-100C) you will also need a fixed 14 mm wrench.
To avoid accidents while handling heavy parts of the equipment, two people should
perform the installation of the microscope, carefully following the enclosed instructions.
Once the installation is over, please continue with the procedures detailed in the Revision and
Operation section.
4.1 FLOOR STAND MICROSCOPE
– OM100F
1) Place the base face down over a soft surface, to obtain the best stability possible without
damaging it. Install the four wheels using a 13 mm wrench.