28
6.3
ADDITIONAL FUNCTIONALITIES OF CH SELECT
▲
/
▼
BUTTONS FOR BOTH: VEO-
XTI1CG2 AND VEO-XRI1CG2
Settings
Buttons
Pressed
Description
IP Address
▲
Pressing and holding the
▲
button for 5 seconds will show the
current IP address of VEO-XTI1CG2 or VEO-XRI1CG2 device in
the Status display. This message will appear following the
sequence "xxx", "xxx", "xxx", "xxx".
ID
▼
Pressing and holding the
▼
button for 5 seconds will show the
current IDs of VEO-XTI1CG2 or VEO-XRI1CG2 device in the
Status display. This message will appear following the sequence
"xxx",
Wake up
▲
or
▼
After the system is powered on, the VEO-XTI1CG2 / VEO-
XRI1G2 device Status display will show the ID Channel. When
idle and Display configured as OFF, pressing
▲
or
▼
button will
turn on the Status display and show the current ID Channel
number (e.g. 001).
Configuration
▲
and
▼
Pressing and holding
▲
and
▼
buttons together at the same
time for 5 seconds will enter the “Configuration” mode with
“CFN” displaying on the status display. Further long pressing of
▲
and
▼
buttons buttons will allow to confirm and enter in the
next configuration menu.
Available menus are:
•
ID modifying.
•
EDID settings.
•
Audio Settings.
•
Output Resolution Settings (Only VEO-XRI1CG2).
•
Video Timeout Settings (Only VEO-XRI1CG2).
ID Settings
▲
and
▼
For VEO-XRI1C2G receivers the ID can be changed just pressing
the
▲
or
▼
buttons and this allows to receive the desired
streaming from the transmitter. VEO-XTI1CG2 Transmitter ID
must be unique in a network so the procedure to change the ID
is not so immediate.
Pressing and holding
▲
and
▼
buttons both together at the
same time for 5 seconds will enter the “ID Settings” mode. The
ID Channel will flash, then pressing the
▲
or
▼
button will
select the desired ID Channel and pressing and hold
▲
and
▼
buttons once again both together at the same time for 5 seconds,
will confirm the selected ID Channel and exit “ID Settings” mode
and go to the next menu.
