9
o
Contact IN:
These ports allow to select a source closing the
corresponding dry contact to the GND pin (marked as ), as reported in
the following table:
Pin number
Source
Pin 1
HDMI1
Pin 2
HDMI2
Pin 3
HDMI3
Pin 4
DisplayPort
Pin 5
VGA/YPbPr/CVBS
2.
AUDIO Ports:
OUT:
This unbalanced stereo line output provides a de-embedded
version of the selected video source audio signal, mixed with the MIC
input. Using the Web GUI or the OSD menu it is possible to associate
every EXT analog audio input to each video source.
EXT1/EXT2/EXT3/EXT4/EXT5:
These unbalanced stereo line inputs allow
embedding an external analog signal to each video source. The selection
can be done using Web GUI or OSD menu. The VGA Source selects
EXT5 as default audio input.
MIC IN:
Through this Mic/Line balanced input it is possible to connect a
presenter microphone that can be mixed with the main audio or
prioritized through the internal audio ducker.
48V/MIC/LINE selector:
This selector allows selecting the type of signal
routed to the MIC IN input. Select the 48V position for condenser
microphones that need 48V DC standard phantom power. Select the MIC
position for microphone level signal such as signal coming from dynamic
microphones. Select the LINE position for pre-amplified signal such as
signal coming from wireless microphone system or any other paging
system.
3.
OUTPUT Ports:
HDMI OUT:
Connect local HDMI display or AV receiver for video and/or
audio output.
HDBT/PoC Port:
Connect the included HDBaseT receiver through a
CAT5e-CAT7 standard cable. This port will provide a remote mirrored
HDMI OUT. It supports 24V PoC feature that allows to power the
HDBaseT receiver from remote without the need of any external PSU.
4.
INPUT Ports:
These video input ports include 3 HDMI inputs, 1 DisplayPort
input and 1 VGA analog input. The VGA port supports VGA, YPbPr and CVBS
format. Factory default is VGA format.