25
11.
REMOTE CONTROL AND IR OPERATION
11.1. Remote Control
1.
Power: Press this button to power on switcher or for
setting it to standby mode.
2.
ADJ: Press this button for operating VGA input auto
adjustment function;
3.
INPUT: Press these buttons for selecting input
sources.
4.
RES: Press this button to select HDMI output
resolution. (Pressing and holding RES for 5 seconds or more
will reset HDMI output resolution to 720p60Hz.)
5.
Menu operation buttons:
o
MENU: press to enter OSD menu.
o
EXIT: press to exit OSD menu.
o
OK: confirm button
o
UP/DOWN/LEFT/RIGHT buttons: OSD value
setting.
6.
VOLUME: Master audio volume control.
7.
MIC: MIC input volume buttons.
11.2. IR operation
The IR signal can be bi-directionally transmitted between the switcher and the HDBT
receiver described in the following two possible scenarios:
11.2.1. Control remote devices
Control of a remote display device by using its corresponding remote control.