8
4.
Operation Buttons:
o
The OK/MENU button allows entering the OSD menu and confirming the
selected options:
o
The EXIT/AUTO button allows exiting the OSD menus. Push EXIT/AUTO
for more than 5 seconds in order to activate the Auto-switching mode.
When this function is enabled, the button will illuminate blue.
o
Pressing MIC-/+ buttons allows to decrease or increase the Microphone
volume.
o
Pressing VOL-/+ buttons allows to decrease or increase the Master
volume.
o
Pressing MIC- and MIC+ simultaneously will reset the output HDMI and
HDBaseT resolution to 720P/60Hz.
o
Pressing VOL- and VOL+ simultaneously will lock/unlock the front panel
buttons. When the panel is locked, the two buttons will illuminate.
6.2. Rear Panel
1.
CONTROL Ports:
o
LAN Port:
This port is the link for Web GUI and Telnet control.
o
RS-232 Port:
Serial control port suitable for controlling VEO-SWM45
switcher or any device connected to RS232 port of the HDBaseT
receiver.
o
IR Input Port:
Connect the provided IR Receiver cable. It allows sending
IR commands to remote device through the HDBaseT extender IR Out
port.
o
IR Input Port:
Connect the provided IR Transmitter cable. It allows
receiving IR commands from a remote IR control through the HDBaseT
extender IR Input Port.