19
8.
AUTO-SWITCHING FUNCTION
VEO-SWM45 includes auto-switching and manual-switching modes. When auto-
switching mode is active, the switcher will act as follows:
8.1. New Input
Once a new input signal is detected, VEO-SWM45 will switch to this new signal
automatically.
8.2. Power rebooting
Once the unit is switched on, the last signal used before powering it off will be
automatically selected. The auto-switch mode function will be still active. If the last used
input signal is still available, it will be displayed automatically. If not, the switcher will
detect all available input signals with priority on HDMI1->HDMI2->HDMI3->DP->VGA
(YPbPr/CVBS).
8.3. Signal removing
Once the currently selected signal is removed, the switcher will start to detect all input
signals with priority on HDMI1->HDMI2->HDMI3->DP->VGA (YPbPr/CVBS); the first
detected signal will be displayed on the outputs.
Notice:
Auto-switching function works only when a new input signal is connected or if
an input signal is removed.