Ecler MIMO4040CDN, Service Manual

Page: 88 / 108

51-0548-0100 M10-20 MIMO4040CDN MIMO7272DN Test and program 10 of 11
8. Now, open DANTE CONTROLLER program. The programmed device must appear on the matrix
list, in both transmitter and receiver sides.
Therefore, verify the size of the DANTE MATRIX by pressing on the [+] of the device connected:
•
If the DANTE FIRMWARE loaded is for MIMO4040CDN, must be of 32x32 DANTE
CHANNELS. The last channels will be DIN32 and DOUT32.
•
If the DANTE FIRMWARE loaded is for MIMO7272DN, must be of 64x64 DANTE
CHANNELS. The last channels will be DIN64 and DOUT64.
•
If these values mismatch, the DANTE FIRMWARE loaded is the wrong one.