Ecler CA200z, User Manual

Page: 56 / 92

56
Voir la section 4.3 Touches LINE 1 à LINE4, MIC1 et MIC2 de la face avant pour plus
d'informations sur le mode de réglage avancé (ADVANCED) des entrées LINE et MIC, accessible
en maintenant pressées leurs touches respectives en face avant.
4.2. Mode spécial de configuration (SETUP)
Le mode spécial de configuration, SETUP , du CA200z s'obtient en maintenant pressé
l'encodeur rotatif de la face avant. Ce mode sert à régler le mode de fonctionnement de l'unité
(STÉRÉO, MONO, BRIDGÉ ou ZONES), à régler le contraste de l'écran LCD, à rappeler des presets
(mémoires de configuration), etc. :
LOAD PRESET
1 ... 5
Rotate knob
to select
PRESET
number
Front knob SP: Short Press (press the front panel knob briefly, less than 0.5 seconds)
Front knob LP: Long Press (press & hold the front panel knob for more than 2.5 seconds)
LOAD PRESET
1, 2, 3, 4 or 5
LP to enter
the PRESET
recovery
mode
LP
OUTPUT MODE
SETUP MODE
To enter SETUP MODE press and hold the front knob for more than 2.5 seconds
SP
SETUP MODE
DEFAULT MODE (MASTER volume control and ZONE selection)
SP to load
PRESET
and get
back
SP
Rotate knob
to browse
options
SP to get
back
LP
LP to enter
the OUTPUT
mode
selection
OUTPUT MODE
Rotate knob
to select a
mode
Rotate knob
to browse
options
LP
Rotate knob
to browse
options
LP
Press and hold MIC1 + MIC2 +
front panel knob to enter the
MIC SETUP ADVANCED MODE
Rotate knob
to browse
options
ADVANCED MODE
KEY CODE REQUIRED
MIC1 MIC2
+ +
OUTPUT LEVEL
Level: 0 to 64 (64 steps)
SP to
select
ZA or
ZB
SWITCH ZA / ZB
(only for ZONES mode)
Rotate knob
to adjust
main
output
volume
MASTER VOLUME
/ ZONE SELECT
Level
shown in
LCD
graphbar
LP
LP to enter
the SETUP
mode
PRESET
number
shown in
LCD
STEREO
MONO
BRIDGE
ZONES
Rotate knob
to browse
options
SP to get
back
VERSION INFO
vX.Y
Firmware
version
shown in
LCD
LP
Rotate knob
to browse
options
SP to get
back
LCD CONTRAST
Level: 0 to 100
Rotate knob
to adjust
level
Contrast
level shown
in LCD
LP to enter
the LCD
CONTRAST
adjust mode
LCD CONTRAST
LCD MODE
Rotate knob
to select a
mode
Mode
shown in
LCD
LP to enter
the LCD
working
MODE
LCD MODE
ON
DIMMED
OFF
SP
SP
SP
SP
Mode
shown in
LCD