Eckman EKELHT, Instruction Manual

Page: 13 / 17

- 12 -
XI . CONNECTION
This machine may only be connected to single-phase 230VAC 50Hz UK mains outlet. Ensure
that the mains voltage is the same as the operating voltage indicated on the rating plate.
XII . OPERATION
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury and invalidate your guarantee.
Switching on
Squeeze the trigger lockout, then squeeze the trigger.
Switching off
Release the trigger or the trigger lockout. Either will stop the machine.
(see photo as below)
NOTE: NEVER ATTEMPT TO LOCK A SWITCH IN THE ON POSITION.
XIII
.
MAINTENANCE

Store the tool, instruction manual and accessories in a secure, dry place. In this way you will
always have the information ready to hand.

Remove dust and dirt regularly.

Re-lubricate all moving parts at regular intervals.

Never use caustic agents to clean plastic parts.
Never disassemble the machine and always have the trimmer maintained or repaired by a
competent person at an authorized service center.
Trigger switch
Trigger lockout