ECI MOVFR-LCD Installation Manual
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
P a g e
|
19
Figure 13 - Drill Pattern placement
•
With the drill template secure into the corner of the operator, drill the five (5) 5/32 inch holes at
locations shown on the template.
•
Drill a 6
th
.106” dia hole for self-tapping grounding screw in area shown in figure 13.
•
Remove the template and insert standoffs supplied with boards into the 5 new holes as shown in
Figure 14 - Standoff Placement
Figure 14 - Standoff Placement
•
Using hardware supplied with the board, mount the Control and Drive boards as shown in Figure
15 -ECI MOVFR LCD Installed. Connect communication cable (supplied with boards) between
Control and Drive boards.
Drill .106” hole here for
self-tapping grounding
screw
