44
•
Using the Web UI
H69044 Revision 3
Settings Page
General Setup
This page allows the user to configure various parameters of the
UT. A description of each item follows:
Terminal Startup
– by default, “Bypass Antenna Pointing” is
not selected, but if the terminal is permanently mounted, you can
select this option to bypass antenna pointing on subsequent
power-ups. For permanent installs you can also configure the
unit to “Always power on when mains is connected” to avoid
having to use the power button.
Connection
: this field controls the satellites the UT will try to
connect to. With the default “Automatic” selection it will search
for all satellites. If an individual satellite is selected the UT will
only search for and use the selected satellite.
Streaming
– By enabling this parameter, the user can turn on a
timer for inactivity on streaming connections. The timer is in
either seconds or minutes and will tear down a streaming context
after
X
seconds or minutes of inactivity.
