www.echostar-int.com
Page 2 - 13
©
2004
E
c
h
o
S
tar In
tern
ati
o
nal
C
o
rpor
ati
o
n
A
ll ri
ght
s
r
e
s
e
rv
e
d
Installation setup
Program SAT
1. SAT
To define the satellite you want to search channels on. For motorized systems, allow the dish
some time to move to the selected SAT until the signal indicator shows a reading.
Red: Direct access to the edit menu; to add/edit a satellite that is not listed.
2. Longitude
(Motorized only); To define the orbital position of the defined SAT.
3. LNB
To define the LNB that you use in your system.
Red: Direct access to the User LNB menu; to add a LNB that is not listed.
4. TP
Shows a transponder, from the internal database, of the defined SAT. If the signal indicator
shows low levels, select another TP that gives a better signal.
Green: Direct access to the edit menu; to add/edit a transponder that is not listed.
5. Search mode
To define the required search mode for a full, update or limited search.
Search channels
Search channels does a channel search on the defined SAT.
Wait until the signal indicator shows a reading, before you press the OK key to continue.
Installation setup
Edit
1. SAT
To define the satellite you want to edit.
Red: to add a satellite that is not listed.
Green: to edit the selected satellite.
2. Longitude
To define the orbital position of the defined SAT.
3. Frequency
To define the Frequency of the transponder.
Red: to add a Frequency that is not listed.
Green: to edit the selected Frequency.
4. Polarity
To select Horizontal or Vertical polarity.
5. Symbol rate
To define the Symbol rate of the transponder.
6. Channel
To define the name of the channel.
Red: to add a channel that is not listed.
Green: to edit the selected channel name.
7. Video PID
To define the Video PID of the selected channel.
8. Audio PID
To define the Audio PID of the selected channel.
9. PCR PID
To define the PCR PID of the selected channel.
Confirm
To save the settings and return to the sub-menu banner.
