Page 1 - 2
EchoStar International Corporation
© 2004
E
c
h
o
S
tar I
n
tern
ati
ona
l C
o
rpor
ati
o
n
A
ll ri
ght
s r
e
ser
v
ed
I
F
THE
PRE
-
PROGRAMMED
LIST
FAILS
1. Press the MENU key.
2. Select the Installation setup menu.
3. If you do not use an Universal LNB:
a. Select Program SAT and press the
OK key.
b. Select LNB, press the OK key
c. Select your LNB.
d. If you have a special LNB, press the
Red key to define an User LNB.
4. If you have a DiSEqC switch:
a. Select System setup and press the
OK key.
b. Review the signal indicators behind the
satellite names, they should show green.
c. Select Port.
d. Change the port number and make sure
your satellites show a green indication.
5. If your satellite is not shown;
a. Select System setup and press the
OK key.
b. Select satellite Astra1 and press the
OK key.
c. Select your satellite and make sure your
satellite shows a green indication.
d. Select Search channels and press the
OK key.
e. Wait for the Search channels to
complete.
I
F
YOU
HAVE
A
D
I
SE
Q
C1.2
INSTALLATION
1. Switch the receiver to ON and wait for the
Languages menu to appear.
2. For Pre-programmed Lists, select Off.
3. Make the required language selections.
4. Select Continue and press the OK key.
5. Make the required TV system selections.
6. Select Continue and press the OK key.
7. Make the required User profile selections.
8. Select Continue and press the OK key.
9. Select System 5.
10. Select Continue and press the OK key.
11. Set the East (EL) and West (WL) limits.
12. Select Continue and press the OK key.
13. Select your first satellite and make the
required selections.
14. Select Position and move the dish to find the
satellite.
15. Select Fine tune and move the dish to find
the best signal.
16. Select Search channels and press the
OK key.
17. Wait for the Search channels to complete.
18. Press the OK key to select another satellite
or Continue to advance.
19. Set the Local time and press the Red key to
confirm the selections.
20. Select Continue and press the OK key.
Q
UICK
REFERENCE
GUIDE
Select System 5.
Set the East (EL) and West (WL) limits.
Move the dish to find the best signal.
