Using the Auto Search option, the
EchoStar DSB-800
2CI
searches for all available channels (Radio and TV)
on the currently selected satellite. The names of the fo
und TV channels are shown on the left and the total n
umber of found TV and Radio channels are mentioned
on the right.
Auto Search
SMATV Configuration
13
SMATV Configuration
Symbol rate alternative 2 27500
Symbol rate alternative 3 27500
FEC AUTO
Start Auto Search
Symbol rate alternative 1
1
2
4
3
5
?
27500
?
i
Exit
Index Freq SR FEC Polarity
45 12670 22000 5/6 Vertical
Auto Search
ASTRA1
Channel Searching Status
0% 50% 100%
Found TV Ch. : 240
Found Rad. Ch. : 100
Arte
Beta BC
BD1
Estilo
Musicals
Reqqae
Note: To stop searching press the key
on the remote control or on the front panel.
This cancels the searches and the found channels
will be discarded. All other keys of the remote
are disabled during searching
A Satellite Master Antenna Television (SMATV) system
is intended for the distribution of television and
sound signals to households in one or 6 more adjacent
buildings.
A SMATV System represents a means for sharing
the same resources among several users for satellite and
terrestrial reception, and it is designed to perform
the adaptation of the satellite TV signals to the SMATV
channel characteristics.
This receiver has a SMATV-IF facility to operate with SMATV.
This configuration allows the direct distribution of the QPSK signal received from the satellite
to the SMATV-IF distribution network in the extended IF band (above 950 MHz).
Before you start, you have to check whether it is possible to use this facility or not in your
household. (You can ask your landlord.)
If this receiver is connected to a SMATV network, select
“
SMATV Configuration
”
.
The most common values for
“
Symbol rate
”
and
“
FEC
”
are already preprogrammed.
(if need be you can enter alternative
“
Symbol rates
”
manually.)
Select
“
Start Auto Search
”
and just press the
OK
key.
Then, the
“
Auto Search
”
procedure will start.
To cancel the processing while the
“
Auto Search
”
is proceeding, press the
MENU
key.
