EchoStar DSB-800 2Ci User Manual Download | Manualshive

Page: 8 / 22

background image

DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver.

DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver.

5. Getting Started

7

Receiver to TV with RF

Receiver to VCR and then to TV with RF

1.Connect the Off-air TV antenna or cable if available to the ANT IN socket of the

EchoStar DSB-800 2CI

.

2. Connect the TV OUT socket of the

EchoStar DSB-800 2CI

to the RF IN of the TV set.

3. Search on the TV set for UHF channel #38. This is the default channel where the

EchoStar DSB-800 2CI

is set to.

1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the

EchoStar DSB-800 2CI

.

2. Connect the TV OUT socket of the

EchoStar DSB-800 2CI

with the RF IN of the VCR.

3. Connect the RF OUT of the VCR to the RF IN of the TV set.
4. Search on the TV set and the VCR for UHF channel #38. This is the default channel where the

EchoStar DSB-800 2CI

is programmed to.

Note : Use different UHF channels for VCR and the

EchoStar DSB-800 2CI

.

TV ANTENNA

TV

RF IN

TV ANTENNA

TV

RF IN

RF OUT RF IN

VCR

«
...
6
7
8
9
10
...
»

Summary of Contents for DSB-800 2Ci























Reviews:

No comments

Related manuals for DSB-800 2Ci

CoreBuilder 3500

Brand: 3Com Pages: 12

Brand: Icom Pages: 28

Brand: jablotron Pages: 3

Brand: Jensen Pages: 56

Brand: Ocean Signal Pages: 2

Brand: Strong Pages: 25

Brand: Aiwa Pages: 20

Micro Link 49085D

Brand: Xantech Pages: 4

Brand: MIRPO Pages: 8

Brand: Aiwa Pages: 16

Brand: Conrad Pages: 49

Brand: D+M Group Pages: 24

Brand: Audiovox Pages: 24

Brand: Boston Pages: 48

Brand: Lumantek Pages: 16

Brand: Yaesu Pages: 88

Brand: FTE Pages: 25

Brand: Vertex Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands