14
15
email - [email protected]
tel - 866-931-8021
email - [email protected]
tel - 866-931-8021
Manual Emergency Recording
To activate manual emergency recording, tap ( ), the current recording will be
locked as emergency recording and cannot be overwritten by loop recording.
NOTE:
• The collision sensing function can be adjusted in the “Protect Level” option
under the settings.
•
Emergency recording video files are saved in memory card: \Event\F\R
folder.
•
Emergency recording video files have the same time frame as loop video
files.
Parking Monitoring
This feature is meant to provide video proof for a collision that occurs when your
vehicle is parked and unattended. When an impact is detected, the mirror dash
cam turns on automatically and records a 30-second video (Front and Rear
cameras start recording simultaneously). These videos will remain protected on
the memory card and will not be overwritten by new recordings.
Parking monitoring function is disabled by default. You can enable the function
by selecting ( ) Movie Mode > Parking Monitoring
When parking monitoring detection is enabled, the system will enter parking
monitoring once the vehicle engine is stopped.
NOTE:
1.
Parking recording files are saved in memory card: \Event\F\R folder.
2. This function requires constant power supply, and the monitor has been
connected to constant power supply so you don’t need to hardwire it.
3. In Parking Monitor Mode, the power cord is equipped with low power
protection. When the battery voltage is lower than 11.8v, the power supply
will stop automatically.
GPS Tracking System
GPS tracking system will automatically capture the speed, location and
coordinates of your car when the car starts.
Loop Recording
Insert a memory card into the card slot, and automatic loop recording will begin
after the vehicle turns on. The loop recording will be divided into several video
clips; the recording will not stop between video clips.
When there is insufficient space on the memory card, loop recording will
automatically overwrite the old files one by one.
When loop recording is in progress, you can manually stop recording by tapping
( )
To enable/disable the audio recording, tap ( )
Time frame for each video file can be 1/3/5 minutes.
NOTE: Loop Recording files are saved in memory card: \Normal\F\R folder.
Approximate recording time
This dash cam requires microSD™ or microSDHC memory card with the FAT32
system file type and requires a card speed rating of 10 or higher.
Approximate recording time (Dual-channel Front+Rear)
12
Memory Card Size
8GB
16GB
32GB
64GB
1.5H
3H
7H
14H
1H
2H
4H
9H
720P 30fps+1080P 25fps
1080P 30fps+1080P 25fps
Default setting 1080P/30fps(front) + 1080P/25fps (rear)
NOTE: If the dash cam cannot recognize your memory card, it may be caused by
an unrecognizable system file type, therefore please format the memory card first.
Automatic Emergency Recording
During an accident, the internal G-sensor will detect the crash and activate
emergency recording. The current recording will be locked automatically to avoid
being overwritten by loop recording.
