background image

2

 

 

 

Do no let a child 
operate the device 
without guidance. Do 
not let a child play with 
the device or any 
accessory. Swallowing 
the accessories may 
lead to peril. 

 

In any of the following 
cases, stop using the 
device, disconnect it 
from the power supply 
and unplug the power 
plug immediately: there 
is smoke emitted from 
the device, or there is 
some abnormal noise or 
smell. Contact the 
specified maintenance 
center for repair. 

 

 

Keep at least 10 cm 
between the device and 
the closest object for 
heat dissipation. Keep 
the device far away 
from any heat source or 
bare fire, such as a 
candle or an electric 
heater. 

  

 

Do not place any object 
on the top of the device. 
Otherwise, the device 
may be too hot during 
operation. It can even be 
deformed or damaged by 
the heavy load. 

 

 

Before cleaning the 
device, stop using it 
and disconnect it from 
the power supply. Use 
a piece of soft cloth to 
clean the device. 

 

 

 

Before plugging or 
unplugging any cable, 
power off the device and 
disconnect it from the 
power supply. 

 

 

When the HG520b is used for a long time, temperature of the shell increases. 
It is normal. 

 

Summary of Contents for HG520b













Reviews: