Echoflex Installation Guide
Dual Tech Vacancy Sensor
Sensor Configuration
MODE
AUX
The Elaho Dual Tech Wall-mount Vacancy
Sensor participates in an Elaho control
system using the configured Space and
Address, which are selectable using the
rotary switches on the sensor electronics
located behind the removable cover.
DIP switches, also located on the sensor
electronics, set the sensor functionality.
Note:
The
[MODE] and [AUX] buttons, and their related LEDs, are not
used and have no functionality on the Dual Tech Wall-mount Vacancy
Sensor.
Set Space and Address
Two rotary switches on the controller provide for assignment of the sensor
Space and Address. By default, these switches are set to Space 1, Address 1.
Commands are shared by all devices within a given space.
1.
Set the Space rotary switch to the desired number (1 through 16) for
the space you want the sensor to control.
2.
Set the Address rotary switch to desired address (1 through 16) for the
sensor identification in the selected space.
Note:
Do not duplicate a device Address within the same Space.
Dual Tech Wall-mount Vacancy Sensor
Page 6 of 12
Echoflex Solutions, Inc.
