background image

10

S

PECIFICATIONS

MODELS SRM-230, SRM-230S

Length ------------------------------------------------------- 1795 mm (70.7 in.)

Width -------------------------------------------------------- 250 mm (9.84 in.)

Height ------------------------------------------------------- 250 mm (9.84 in.)

Weight (dry) w/Cutter Head (SRM-230) ---------------- 5.1 kg (11.2 lb.)

Weight (dry) w/Cutter Head (SRM-230S) --------------- 4.9 kg (10.8 lb.)

Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine

Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)

Stroke -------------------------------------------------------- 28.0 mm (1.10 in.)

Displacement ----------------------------------------------- 22.8 cc (1.39 cu. in.)

Exhaust ------------------------------------------------------ Spark Arrestor Muffler

Carburetor -------------------------------------------------- Zama diaphragm model RB w/purge pump

Ignition System -------------------------------------------- Flywheel magneto, transistor control ignition type

Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)

Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)

Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil

Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,

more than 10% ethyl alcohol or 15% MTBE.

Oil ------------------------------------------------------------ Power Blend 

TM

 Premium Universal 2-Stroke Oil

Fuel Tank Capacity ---------------------------------------- 0.58 lit. (19.6 US fl. oz.)

Starter System ---------------------------------------------- Automatic Rewind Starter

Clutch ------------------------------------------------------- Centrifugal Type

Vibration Isolated System --------------------------------- Rubber cushion on engine mount (heavy duty).  Rubber grip on

front handle.

Operating Rod ---------------------------------------------- 25.0 mm aluminum tube

Drive Shaft (SRM-230) ------------------------------------ 6.35 mm (1/4 in.) flexible shaft

Drive Shaft (SRM-230S) ----------------------------------- 7 mm (1/4 in.) steel shaft

Gear Case Ratio -------------------------------------------- 1.4:1 Reduction

Rotating Direction ----------------------------------------- Counter Clockwise; viewed from top

Cutter Head ------------------------------------------------- Nylon line head (2-line) with .095 Crossfire™  Line capacity 6 m (20 ft.)

Handle ------------------------------------------------------- Front - Loop and right rear handle with rubber grip

Shoulder Harness ------------------------------------------ Optional

Idle Speed --------------------------------------------------- 2,400 - 3,200 RPM

Wide Open Throttle Speed (W.O.T.)  with

Nylon Line Head ------------------------------------------- 8,500 - 10,500 RPM

Wide Open Throttle Speed (W.O.T.)  with Blade ------ 9,500 - 11,500 RPM

Summary of Contents for SRM-230





























Reviews: