background image

P

RO

 A

TTACHMENT

 S

ERIES

O

PERATOR

'

S

 M

ANUAL

9

EMISSION

 

CONTROL

The emission control system for this engine is EM (Engine Modification).

An Emission Control Label is located on the engine.  (This is an EXAMPLE ONLY, information on label varies by engine
FAMILY).

D

ESCRIPTION

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
other assembly may be necessary.

After opening the carton, check for damage.  Immediately notify your retailer or ECHO Dealer of damaged or missing
parts.  Use the contents list to check for missing parts.

CONTENTS

1 - Power Head w / Upper Drive Shaft Assembly

1 - Plastic Bag (co-pack)

- 1, Operator's Manual

- 1, Warranty Registration Card

- 1, ECHO Emissions and Warranty Statement

- 1, Safety Glasses

- 1, 2-Stroke Oil Sample

- 1, Front Handle (L.H.)

- 4, 5 mm x 35 mm screws

- 4, 5 mm nuts

I

MPORTANT  ENGINE  INFORMATION

ENGINE FAMILY: VEH025UB24RA
DISPLACEMENT: 25.4cc
THIS ENGINE MEETS U.S. EPA PHI AND 1995 - 1999
CALIFORNIA EMISSION REGULATIONS FOR ULGE
ENGINES. REFER TO OWNER’S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

IMPORTANT  This spark ignition system complies with Canadian ICES-002.

Summary of Contents for Pro Attachment Series





























Reviews: