![background image](http://html.mh-extra.com/html/echo/ppt-2620/ppt-2620_operators-manual_532512034.webp)
MAINTENANCE
PPT-2620
34
X7507820600
© 2/2017 ECHO Inc.
IMPORTANT NOTE
- Time intervals shown are maximum. Actual use and
your experience will determine the frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
(1) Apply lithium based grease every 25 hours of use.
(2) Low evaporative fuel tanks DO NOT require regular maintenance to
maintain emission integrity.
* Replacement is recommended based on the finding of damage or wear
during inspection.
Air Filter
Level 1
1.
Close choke (COLD START [
] position). This prevents dirt from
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.
2.
Remove air filter cover. Brush dirt from inside cover.
Fuel Cap Gasket
Inspect*
1
Spark Plug
Inspect/Clean/Replace*
1
Muffler Spark Arrestor
Inspect/Clean/Replace*
2
Cylinder Exhaust Port
Inspect/Clean/Decarbon
2
Drive Shaft (Flex Cable Models)
Grease(1)
2
Yearly
Fuel Filter
Inspect/Replace*
1
Fuel Cap Gasket
Replace*
1
Parts Required:
Tune Up Kit.
COMPONENT/SYSTEM
MAINTENANCE
PROCEDURE
REQ’D
SKILL
LEVEL