PPT-2620
DESCRIPTION
X7507820600
17
© 2/2017 ECHO Inc.
ENGLISH
1.
POWER HEAD
- Factory Assembled to the Drive shaft assembly.
Includes the Engine, Clutch, Fuel System, Ignition System and Recoil
Starter.
2.
THROTTLE HANDLE - FOR RIGHT HAND
- Contains Stop Switch,
Throttle Lockout, and Throttle Trigger.
3.
THROTTLE TRIGGER LOCKOUT - This lever must be held during
starting. Operation of the throttle trigger is prevented unless throttle
trigger lockout lever is engaged.
4.
STOP SWITCH
- “SLIDE SWITCH” mounted on top of the Throttle
Trigger Housing. Move switch FORWARD to RUN, BACK to STOP.
5.
STRAP HOOK - Used to secure unit to shoulder harness
6.
LOWER SHAFT TUBE – Durable fiberglass mesh housing.
7.
CUTTING ATTACHMENT - Sealed, gear ratio is 1.5:1 reduction.
8.
AUTOMATIC OILER ASSEMBLY - Self oiling. Use high quality, low
viscosity, non-detergent bar and chain oil.
9.
GUIDE BAR
10. SAW CHAIN - Chain, serving as a cutting tool.
11. CUTTING SHOE - Used to capture and stabilize branch while cutting.
Place cutting shoe against branch, accelerate and lower saw chain into
branch.
12.
THROTTLE TRIGGER
- Controls engine speed. Spring loaded to
return to idle when released. During acceleration, press trigger
gradually for best operating technique.
13. SHOULDER HARNESS - An adjustable strap that suspends the unit
from the operator.
14. RECOIL STARTER HANDLE - Pull handle slowly until recoil starter
engages, then quickly and firmly. When engine starts return handle
slowly. DO NOT let handle snap back or damage will occur.
15.
SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER
WITH CATALYST
- The muffler or catalytic muffler controls exhaust
noise and emission. The spark arrestor screen prevents hot, glowing
particles of carbon from leaving the muffler. Keep exhaust area clear of
flammable debris.
