X7501186001
31
© 2/2016 ECHO Inc.
PB-250LN
MAINTENANCE
4.
Inspect heat shield, and replace if
damaged.
5.
Install heat shield and muffler.
6.
Tighten muffler mounting bolts (or
nuts) to 70-80 kgf•cm (60-70 in•lbf).
7.
Loosely reassemble engine cover.
8.
Tighten all screws securely.
9.
Attach spark plug lead.
10. Start engine, and warm to operating
temperature.
11. Stop engine, and re-tighten mounting bolts (or nuts) to specifications.
Carburetor Adjustment
Engine Break-In
New engines must be operated a minimum duration of two tanks of fuel break-in
before carburetor adjustments can be made. During the break-in period your
engine performance will increase and exhaust emissions will stabilize. Idle
speed can be adjusted as required.
High Altitude Operation
This engine has been factory adjusted to maintain satisfactory starting,
emission, and durability performance up to 1,100 feet above sea level (ASL)
(96.0 kPa). To maintain proper engine operation and emission compliance
above 1,100 feet ASL the carburetor may need to be adjusted by an authorized
ECHO service dealer.
If the engine is adjusted for operation above 1,100 feet ASL, the
carburetor must be re-adjusted when operating the engine below 1,100
feet ASL, otherwise severe engine damage may result.
Level 2.
Note: Every unit is run at the factory and the carburetor is set in
compliance with emission regulations. Carburetor adjustments,
other than idle speed, must be performed by an authorized
ECHO dealer.
Before adjustment make sure that:
• Air filter is clean and properly installed.
Parts Required:
None
Summary of Contents for PB-250LN
