31
Digital Mode Switch
To the right of the Input clocks is a dropdown menu labeled “Digital Mode
Switch.” This menu allows you to select which digital inputs/outputs Mona
will use at any given time. The options are S/PDIF RCA, S/PDIF Optical,
and ADAT. Mona can only use one digital mode at a time. When one of
the two S/PDIF modes is selected, the “View ADAT Ctrls” checkbox will
be greyed out. You can only access the ADAT controls when the ADAT
mode is currently selected.
Note: Sample rates above 48kHz will not be available while ADAT mode
is selected. This is because ADAT does not support sample rates higher
than 48kHz.
View ADAT Ctrls
While you are in the ADAT digital mode, you can view the Console ADAT
controls at any time by checking the “View ADAT Ctrls” checkbox. As
seen below, these controls are the same as the analog input, monitoring, and
output controls. The only exception is the lack of controls for the ADAT
outputs. If you want to go back to the analog controls, just uncheck the
“View ADAT Ctrls” checkbox. You cannot monitor the ADAT inputs
through the S/PDIF outputs.
Note: If at any time you switch the digital mode to one of the S/PDIF
options, the ADAT controls will become unavailable and the Console will
return to displaying the analog and S/PDIF controls.