background image

G

RASS

 T

RIMMER

O

PERATOR

'

S

 M

ANUAL

9

____

- Trimmer Assembly:

____

-

Power Head

____

-

Drive Shaft Assembly

____

- Plastic Bag (Co-Pack)

____

- Operator's Manual

____

- Safety Manual

____

- Warranty Card & Limited Warranty

____

Locking Tool, P/N 89751801131 (head locking tool)

____

- Safety Glasses

____

- Echo Power Blend X 

TM

 2-stroke oil sample

____

- 12 pcs. 8 in. x .080 Pre-cut Nylon Line

____

- Rapid Loader

TM

 2-line Head

____

- Shield Assembly

____

- Line Head Mounting Hardware:

____

- 3/8-24 Locknut

____

- Small  Washer

____

- Large Washer

* ___

- Locking Tool, P/N 89751801131 (wrench handle)

* ___

- Wrench 17 x 14.5, P/N X602000031

C

ONTENTS

The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions,
installation of the plastic debris shield, nylon line head, and positioning of the front handle may be necessary.

After opening the carton, check for damage.  Immediately notify your retailer or ECHO Dealer of damaged or missing
parts.  Use the contents list to check for missing parts.

*

NOTE
Assembly tools are not supplied with pre-assembled units.

A

SSEMBLY

Tools Required: Locking Tools (2),  Wrench 17 x 14.5 (9/16 in.)

Parts Required: Rapid Loader

TM 

 Head,  Large washer, Small washer,

3/8-24 Locknut, (2) Pre-cut Nylon Line 8 in. x .080 in.,
Plastic Shield Assembly

  

  WARNING

Cut-off knife on debris shield has sharp edges.  Avoid contact
when installing or removing line head.

Summary of Contents for GT-200R - 10-07

























Reviews: