117
©
Echo 246F
User Manual
BIOS SETUP
4.4.1.3 PEG Port Configuration
PEG port options for PCIe device.
Figure 4-4-1-3 : PEG Port Configuration
4.4.2 PCH-IO Configuration
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
S0 State : Always turn-on the system when power source plugged-in.
S5 State : Always turn-off the system when power source plugged-in.
Figure 4-4-2 : PCH-IO Settings
Summary of Contents for Echo246F
Page 95: ...87 Echo 246F User Manual SYSTEM SETUP Step 11 Finished ...
Page 97: ...89 Echo 246F User Manual SYSTEM SETUP Step 3 Install DDR4 RAM module into SO DIMM socket ...
Page 99: ...91 Echo 246F User Manual SYSTEM SETUP Step 3 Install Mini PCIe card into socket ...
Page 101: ...93 Echo 246F User Manual SYSTEM SETUP Step 4 Fasten washer 1 and 2 Step 5 Finished ...