119
©
Echo 246F
User Manual
BIOS SETUP
4.4.2.2 SATA and RST Configuration
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port :
Port n
Enable or disable SATA Port.
Hot Plug
Designated this port as Hot Pluggable.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
SATA Device Type
Identifies that the SATA port is connected to solid state drive or hard disk drive.
Figure 4-4-2-2 : SATA and RST Settings
Summary of Contents for Echo246F
Page 95: ...87 Echo 246F User Manual SYSTEM SETUP Step 11 Finished ...
Page 97: ...89 Echo 246F User Manual SYSTEM SETUP Step 3 Install DDR4 RAM module into SO DIMM socket ...
Page 99: ...91 Echo 246F User Manual SYSTEM SETUP Step 3 Install Mini PCIe card into socket ...
Page 101: ...93 Echo 246F User Manual SYSTEM SETUP Step 4 Fasten washer 1 and 2 Step 5 Finished ...
