DSRM-200
DESCRIPTION
X7508161200
13
© 3/2014 ECHO Inc.
1.
GEAR CASE
2.
DRIVE SHAFT ASSEMBLY
– Includes the drive shaft, throttle handle, support handle, and safety
decals.
3.
SUPPORT HANDLE - FOR LEFT HAND - Grip for Left Hand
.
4.
STOP SWITCH
- “SLIDE SWITCH” mounted on top of the throttle handle. Move switch FORWARD to
RUN, BACK to STOP.
5.
THROTTLE TRIGGER LOCKOUT
- Operation of the throttle trigger is prevented unless throttle trigger
lockout lever is engaged.
6.
SPEED SELECTOR SWITCH
- Select the
speed position or the
speed position.
7.
THROTTLE TRIGGER
- Spring loaded to return to idle when released. During acceleration, depress
gradually for best operating technique.
8.
THROTTLE HANDLE - FOR RIGHT HAND
- Contains Stop Switch, Throttle Lockout, and Throttle
Trigger.
9.
POWER HEAD
– Houses Motor and Battery.
10.
PLASTIC DEBRIS SHIELD ASSEMBLY
- MUST be installed on unit. Shield assembly includes the
Cut-Off Knife. Mounts on the Gear Housing Assembly just above the cutting attachment. Helps protect
the operator by deflecting debris produced during the trimming operation.
11.
CUT-OFF KNIFE
- Automatically trims line to the correct length after head is tapped on the ground. If
trimmer is operated without a cut-off knife, the line will become too long and motor damage may occur.
12.
NYLON LINE HEAD
- Contains replaceable nylon trimming line that advances when the trimmer head is
tapped against the ground while the head is turning at normal operating speed.