background image

4

X7508161200

© 3/2014 ECHO Inc.

SAFETY

DSRM-200

SAFETY

Manual Safety Symbols

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational 
messages preceded by symbols or key words. The following is an explanation of those symbols and key 
words and what they mean to you.

The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition 
which WILL lead to serious personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition 
which CAN lead to serious personal injury or death if not avoided.

The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition 
which may lead to minor or moderate personal injury if not avoided.

The enclosed message provides information necessary for the protection of the unit.

Note:  This enclosed message provides tips for use, care and maintenance of the unit.

CIRCLE AND SLASH SYMBOL
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result 
in serious or fatal injury.

International Symbols

Symbol

Description

Symbol

Description

Symbol

Description

Symbol

Description

Read Instruction 

Manual

Operate Only with 

Debris Shield in 

Place

Fire Hazard, Risk 

of Explosion or 

Burns

Power

ON / OFF

Wear Head, 

Eye, and 

Hearing 

Protection

Finger Sever 

Hazard

Check Charger’s 

Power Supply and 

Plug for Damage

Metal Blade 

Prohibition (Use 

Nylon Line Head 

Only)

Wear Hand and 

Foot Protection

DO NOT Use in 

Rain; Protect from 

Fluids

Remove Battery 

from Trimmer 

When Not in Use

Safety Alert 

Symbol

DO NOT Throw 

Electrical 

Appliances in 

Garbage

Flying Debris 

Hazard

Burn Hazard 

Alert

DO NOT Subject 

Battery to 

Temperatures 

Above 140°F 

(60°C)

Recycle Electrical 

Appliances

Summary of Contents for DSRM-200





























Reviews: