MOTOR AND CONTROL SYSTEM
38
DCS-1600
6-2 Installing motor and control board
1. Reconnect 8-pole terminal (E) of control board (B).
2. Install control board (B) on motor cover as shown.
3. Place battery connection terminal (C) between
ribs of motor cover as shown.
4. Pass lead (F) of wire harness between ribs of
motor cover as shown.
5. Install motor on motor cover.
6. Connect 3-pole terminal (G) of control board and
3-pole terminal (H) of motor.
7. Connect 5-pole terminal (D) of control board and
5-pole terminal (J) of motor.
8. Adjust position of motor (A) along the line (K) of
fan case.
9. Reassemble removed parts.
- Switches, trigger lever and motor cover (Refer
to Section 5-2)
- Worm gear and drum (Refer to Section 4-3)
- Brake lever and brake switch (Refer to Sec-
tion 3-2)
E
B
F
G
H
D
J
B
K
A
C
