background image

S

haft

 h

edge

 C

lipper

 a

ttaChment

O

peratOr

'

S

 m

anual

 11

lubrICaTIon

Blades 

Level

 

1

Parts Required:

   20W Engine Oil (lubrication), 50-50 mixture of 

 

 

 

 kerosene and 20W oil (cleaning).

  WARNING

Hedge Clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Avoid touching blades whenever possible, 

and always wear gloves to protect hands. 

1.  Brush loose debris from blade and coat both sides of blade with the 

50-50 cleaning mixture.

2.  Allow cleaning mixture to soften the remaining gummy residue 

then wipe it from the blade.

3.  Apply clean oil to the entire length of the blade.  Be certain the 

blade bolts are lubricated.

4.  Wipe excess oil from the blade before putting the unit back in 

service.

Your ECHO product is designed to provide many hours of trouble free service. Regular scheduled maintenance will 

help achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit 

to an ECHO Service Dealer for maintenance.  To help you decide whether you want to DO-IT-YOURSELF or have the 

ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO dealer for repairs.

skIll

 

levels

 

Level 1

 =  Easy to do. Common tools may be required.

 

Level 2

 =  Moderate difficulty. Some specialized tools may be required.

 

maInTenanCe

 

InTervals

Component

Maintenance Procedure

Skill Level

Interval

Drive Shaft

Grease

1

Every 25 hours of use [1]

Gear Housing

Grease

1

Every 15-25 hours of use [1] 

Blades

Lubrication

1

Every 15-25 hours of use

Blades

Sharpen

2

As needed

Blades

Adjust

2

Every 40 hours of use

Screws/Nuts/Bolts

Inspect/Tighten/Replace

1

Before Each Use

IMPORTANT

 - Time intervals shown are maximum. Actual use and your experience will determine the frequency 

of required maintenance.
[1] Apply POWER BLENDX

TM

 Grease.

Summary of Contents for 99944200485

















Reviews: