background image

8

Parts Required:

  PAS or SRM-SB Power Head w/Shaft & Coupling.

1.  Set Power Head/Shaft Assembly on a level surface.

2.  Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to 

lock-out position.

3.  Remove vinyl cap from attachment drive shaft.

4.  Remove cardboard spacer, if necessary.

5.  Carefully fit attachment drive shaft assembly into coupler (B) to 

decal assembly line (C), making sure that the inner lower drive 

shaft engages into the square upper drive shaft socket.

NOTE

Earlier model Power Heads may have shorter couplings.  Short 

couplings fit flush to decal point (E). New couplings are 4-3/4 in. 

long, and fit flush to line (C).

 

C

onTenTs

The ECHO product you have purchased has been factory pre-assembled for your convenience. 

After opening the carton, check for damage.  Immediately notify your retailer or ECHO Dealer of damaged or missing 

parts.  Use the contents list to check for missing parts.

_

____  1 - Shaft Hedge Clipper Attachment

_____  1 - Operators Manual

_____  1 - Safety Manual 

_____  1 - Warranty Card

_____  1 - Blade Cover

_____  1 - Storage Hook Assembly 

a

ssembly

power

 

head

 

shafT

/

lower

 

shafT

 

assembly

  

  WARNING  

Do not perform maintenance or assembly procedures with engine running.

A

B

D

F

E

C

Summary of Contents for 99944200485

















Reviews: