Echelon i.LON 1000, User Manual, Page: 20 / 126

2-8 Shipping Content and Hardware
•
Never install the unit in an enclosed rack or room that is not adequately ventilated.
Always ensure that the room or rack has sufficient ventilation to maintain the operating
temperature range of the
i. LON 1000.
Required Tools and Materials
• Set of rack-mounting brackets
•
Screws (included with rack mount kit)
• Phillips screwdriver
To install the i. LON 1000 in the EIA 19-inch rack, follow these steps:
1.
Remove all power and signal cables from the i. LON 1000.
2.
Remove the 4 rubber feet on the bottom of the i. LON 1000 by pushing up on the side of
each foot.
3.
Align the holes on the short side of one bracket with the holes on the side of the i. LON
1000. Insert one of the small screws (4/40) into each hole and tighten with the
screwdriver as shown in Figure 2-4.
Figure 2-4 Connecting the i. LON 1000 Rack-mounting Brackets
4.
Repeat step 3 above to attach the second bracket to the i. LON 1000 unit.
5.
Install the i. LON 1000 in the rack as shown in Figure 2-5.
Insert a large screw (10/32) in
each bracket and tighten.
Front
19" EIA Rack Mount
10/32 Screws 4x
Figure 2-5 Installing the
i.
LON 1000 in the EIA 19-inch Rack