i
.LON 1000 Internet Server User’s Guide
A-3
Table A-1
– Console Commands
Command
Description
activateapp
index
|
name
Activates an application instance, specified by index or name. Only
the following are supported:
Router (1)
DataServer (2)
WebServer (3)
authkey
key
Modifies/sets the authentication key. Specify key in hexadecimal
(spaces permitted).
cd
[
directory
]
Change directory, or show directory if no argument.
copy
file1
file2
Copies
file1
to
file2
createapp
name
Creates an application instance, specified by name, and returns the
index assigned to the application. The application is automatically
activated upon creation. See
activateapp
for supported names.
date
dd/mm/yyyy
Modifies/sets the date. Not allowed if the device is synched to a time
server.
deactivateapp
index | name
Deactivates an application instance, specified by index or name. See
activateapp
for supported names. This command does not delete the
instance of the application; it deactivates the application. Primarily
used for troubleshooting.
delete
file
Deletes a file or directory.
dhcp
[
on
|
off
]
Indicates whether DHCP will be used to retrieve the
i.
LON 1000’s IP
address, subnet mask, and gateway address.
Set DHCP to
off
to manually configure the IP address, subnet mask,
and gateway address. See
Using DHCP with i.LON 1000 Devices
in
Reference
for more information on using DHCP.
dir
[
directory
]
Lists file directory contents.
factorydefault
Restores the
i.
LON 1000 settings to the factory default settings. Any
files, such as web pages, added by the user are not affected.
format
Formats the flash disk.
Caution!
This command deletes all files,
including the
i.
LON 1000 System image file. After using this
command, you must upload a new software image to the
i.
LON 1000.
ftppassword
password
Sets the FTP password to
password
. A required parameter;
anonymous FTP not allowed.
ftpuser
name
Sets the FTP user name to
name.
A required parameter; anonymous
FTP not allowed.
gateway
address
Modifies/sets the gateway address e.g. gateway 10.1.10.1
help
[all |
command
]
Displays a listing of the common console application commands, the
full command set, or a help description for the specified command.
hostname
name
Modifies/sets the host name of the
i.
LON 1000 as used by DHCP
install
idx
[dmn] sn
nd
Installs a L
ON
W
ORKS
domain/subnet/node address for the application
specified by
idx.
Caution!
This command is provided for backward
compatibility to add an
i.
LON 1000 Web server to a pre-installed
network.
Echelon does not recommend or support using this
command
.
Both the Web server and
i.
LON 1000 router should be
installed using a standard network installation tool such as
LonMaker.
ipaddress
address
Modifies/sets the
i.
LON 1000’s IP address e.g.: ipaddress
10.1.253.100
listapp
Lists the current application instances.
mkdir
directory
name
Creates a directory.
Summary of Contents for i.LON 1000
