i
.LON 1000 Internet Server User’s Guide
2-3
(model 72951) may be attached to each side of the
i.
LON 1000 enclosure for EIA 19-inch rack
mounting in a single rack height space.
Figure 1.3 shows the rear panel of the
i.
LON 1000, including the connectors, LEDs, and
control switches. The
i.
LON 1000 interfaces with the IP channel through a RJ-45 Ethernet
10BaseT port. The L
ON
W
ORKS
network connection (TP/FT-10 or TP/XF-1250) is effected by
way of a removable screw terminal. DB-9 connectors are provided for the console and serial
ports. The console port provides a serial connection to a VT-100 terminal or terminal
emulation software such as HyperTerminal. The serial port is reserved for future use.
Ports, LEDs, Switches & Wiring Options
Figure 2-1 shows the rear panel of the
i.
LON 1000, including the connectors, LEDs, and
control switches. Table 2.4 shows the operation of the control switches on the back panel of
the
i.
LON 1000. Table 2-5 describes the LED functionality.
Figure 2-1
i.
LON 1000 Back Panel
Input Power
The
i.
LON 1000 operates from low voltage 24VAC or DC at 1A. The
i.
LON 1000 may be
powered by an optional Echelon 24VDC plug-in power supply (model 72901-p, where p
identifies the type of power cord), a customer-supplied 24VAC or DC power supply, or a
battery-backed 24VDC rechargeable power supply.
Two connector options are provided for powering the
i.
LON 1000: a 2.1mm barrel connector
and a screw terminal connector. Both the barrel connector and the screw terminal connector
are
polarity insensitive
. Use either the barrel connector or the screw terminals for input
power -
DO NOT power the
i.
LON 1000 through one input power connector and
then power another device using the
i.
LON 1000's other input power connector.
Network connection
to a twisted-pair
TP/FT-10 or TP/XF-
1250 L
ON
W
ORKS
channel. BLAT Mating
Connector Plug.
Weidmüller PN
148426.
Diagnostic
LEDs
Service,
Reset, & Aux
Switches
IP Connection
(Ethernet
10BaseT)
Using a null-
modem cable,
the
i
.LON 1000’s
Console port
connects to a
PC COM port.
24V AC/DC power
connection.
Barrel Power
Connector.
24V AC/DC
power
connection. BL
Mating Connector
Plug. Weidmüller
PN 125911.
Reserved
for future
use.
Summary of Contents for i.LON 1000
