LonWorks Router User’s Guide
35
Figure 17
. RX and TX Network Activity Indicator Circuits
When packets are transmitted, the TX network activity LED is active for the
duration of the entire data transmission. When packets are received, the RX
network activity LED is active for each bit received, and inactive between bytes.
For both circuits, the approximate time constant for LED visibility is 100 ms.
Power Requirements
The following sections describe the power requirements for a L
ON
W
ORKS
router.
RTR-10 Power Requirements
An RTR-10 router requires a +5 VDC ±10% at 200 mA.
Router 5000 Power Requirements
A Router 5000 chip requires a +3.3 VDC power source with sufficient current to
power the control module in all modes of operation.
Summary of Contents for 14315R
