INSTALLATION INSTRUCTIONS
HIGH PRESSURE PUMP
WITH ELECTRIC MOTOR
Mount the high pressure pump/motor unit to a cool location free of vibration.
MEMBRANE HOUSING
Mount the high-pressure membrane housing(s) with the provided brackets vertical
(with the flow upwards) or horizontal in a convenient location away from the heat of the engine as
close as possible to the high pressure pump.
The membrane is sealed within its housing by plugs at both ends. Inside is a small amount of
preservative to keep the membrane moist and prevent bacterial growth.
The shelf life of the preservative, under best conditions, is one year. We recommend you install
and use your watermaker as soon as possible.
When all other components and hoses/tubes are completely assembled, remove the caps on the high
pressure fittings and the blue sealed tube from the product water outlet on the membrane housing/s and
then finish making all final hose/tube connections. This will insure that the membrane is kept moist.
CONTROL PANEL
Mount the control panel in an easily accessible location as close as possible to the membrane
housing(s).
SEA STRAINER
Mount the sea strainer with the provided 3/4" NPT nylon nipple directly to the intake of the 20 micron
pre-filter housing. If an optional boost pump is required (refer to “Available Options and
Accessories”), mount the sea strainer in a serviceable location in between the sea-cock and the boost
pump. Connect the barbed fittings with the reinforced 3/4” vinyl hose. Secure the hose with the
stainless steel hose clamps. Refer to the “Installation Instructions” (Optional).
Summary of Contents for 200-AMS-1
Page 18: ......
