ECG EWS 60103, Instruction Manual

Page: 21 / 116

English English
21
Child lock
This feature is designed to prevent children from misusing the controls.
Select a programme and press the Start/Pause button. You can then activate the Child Lock.
Press the Temp. and Function or Delay and Function (depending on the washing machine
model) for 3 seconds until the beep sounds. The child lock light will come on.
When the child lock is activated, the display alternates between "CL" and the remaining time.
Pressing any other button will cause the child lock indicator to flash. When the program is
finished, the display alternates between "CL" and "END".
The child lock deactivates the function of all buttons except the on/off button and the child lock
button! The child lock can only be deactivated by pressing the Temp. and Function or Delay
and
Function
buttons simultaneously (depending on the washing machine model)! Deactivate
the child lock before selecting a new programme!
Muting the buzzer*
1. Select the desired programme.
2. Press the
Speed
button for 3 seconds, the buzzer will go silent.
To activate the buzzer function, press the button again for 3 seconds. The setting will be
preserved until the next launch.
ATTENTION! THE BUZZER CANNOT BE REACTIVATED AFTER IT HAS BEEN SILENCED.
* For EWSI 72121 Steam only
CLEANING AND MAINTENANCE
Warning:
• Before starting maintenance, disconnect the appliance from the mains and turn off the tap.
Cleaning the outside of the washing machine
Proper maintenance of your washing machine can extend its life. If necessary, the surface can be cleaned with
diluted non-abrasive neutral detergents. If water overflows, wipe it off immediately with a damp cloth. Do not
use any sharp objects.
Formic acid and its diluted solvents or equivalent substances such as alcohol, solvents or chemical products
are prohibited.
Drum cleaning
Rust left by metal objects inside the drum is immediately removed with chlorine-free cleaning agents. Never
use wire. Do not put clothes in the washing machine while the drum is being cleaned.
Cleaning door seals and glass
After each wash, wipe the glass and gasket to remove streaks and stains. If the gunk builds up, it can cause
leaks. After each wash, remove coins, buttons and other objects from the seal. Clean the door seals and glass
every month to ensure normal operation of the appliance.