English
English
10
Connecting water drain hose
Connect the drain hose to the sink outlet elbow. Never try to extend the
drain hose. Do not put the hose for draining water from the washing
machine into a container, bucket or bathtub. Make sure that the drain
hose is not bent, kinked, squashed or extended.
The drain hose must not be more than 100 cm from the ground.
USE
Quick start
Warning:
•
Before washing, make sure the washing machine is installed correctly.
•
Your appliance has been thoroughly checked before leaving the factory. To remove water residues and
neutralise any odours, we recommend cleaning the appliance before first use. For this reason, run the
Cotton programme at 60 °C without laundry and detergent.
Calibration
Note:
The calibration function is only available on the EWSI 72121 Steam model.
We recommend that you calibrate your washing machine to ensure it delivers the best possible performance.
The appliance is able to detect the amount of laundry loaded. This feature optimises product performance by
minimising energy and water consumption, saving you money and time.
1. Remove all accessories from the drum and close the door.
2. Plug the power cord plug into a power outlet.
3. Switch on the washing machine and press the
Delay
and
Temp.
buttons simultaneously for about 10
seconds until "t19" appears on the display.
4. Press the
Start/Pause
button to start the appliance and wait until
****
appears on the display.
Before washing
1. Plug the washing machine into a socket.
2. Open the water tap.
3. Fill the washing machine with laundry.
4. Close the drum door.
5. Add detergent.
Note:
•
For pre-wash machines, you need to add detergent in section I, see the table in the chapter "Detergent
dispenser".
•
Before each wash, check the drum to make sure it is turning smoothly.
Washing
1. Select a program.
2. Select an additional function.
3. Start washing by pressing the
Start/
Pause
button.
Summary of Contents for EWS 60103
Page 2: ......
