![background image](http://html1.mh-extra.com/html/ecg/ewf-1053-md/ewf-1053-md_instruction-manual_3963404022.webp)
English
English
22
ERROR CODE
CAUSE
SOLUTION
E01
The washing machine door is not
properly closed.
Close the door properly until you hear
a click. If your washing machine still shows
a malfunction, switch off the washing machine,
unplug it and contact the nearest authorized
service center immediately.
E02
Insufficient water pressure, or low
water level inside the washing
machine.
Check if the tap is open fully. The water supply
may be disconnected. If the problem persists,
the washing machine will stop automatically
after a while. Disconnect the washing machine,
close the water tap and contact the nearest
authorized service center.
E03
Defective pump, clogged pump
filter or faulty electrical connection
of the pump.
Clean the pump filter. If the problem persists,
contact the closest authorized service centre.
(*)
E04
There is an excessive amount of
water in the washing machine.
The washing machine drains the water by
itself. Once the water has drained, switch off
the washing machine and unplug it. Close the
water tap and contact the nearest authorized
service center.
(*) See the chapter on maintenance and cleaning of the washing machine.
TECHNICAL SPECIFICATIONS
EWF 1053 MD
Built in appliance
No
Maximum load capacity (dry laundry) kg
5
Dimensions (H x W x D) [mm]
845 × 597 × 497
Nominal voltage
220 240 V ~ 50 Hz
Power input
2100 W
Lid latch
10 A
Water pressure (MPA) MIN/MAX
0.1, MPA/ 1, MPA
Summary of Contents for EWF 1053 MD
Page 2: ......