![background image](http://html1.mh-extra.com/html/ecg/ewf-1053-md/ewf-1053-md_instruction-manual_3963404014.webp)
English
English
14
Tablecloth
250
•
Load each piece of laundry separately.
•
Make sure that no objects are caught between the rubber seal and the door.
•
Gently push on the door until it clicks.
•
Make sure that the door is completely closed, otherwise the program will not start.
Adding detergent to the washing machine
The amount of detergent used in the washing machine depends on the following criteria:
•
If the laundry is only slightly soiled, do not prewash it. Put a small amount of detergent (according to the
manufacturer’s instructions) in compartment II of the detergent drawer.
•
If the laundry is soiled too much, select the prewash program and place ¼ of the detergent to be used in
section I of the detergent drawer and the rest in section II.
•
Use detergents designed for automatic washing machines in the washing machine. Follow the
manufacturer’s instructions regarding the amount of detergent to be used.
•
More detergent is needed in areas with hard water.
•
The amount of detergent required increases with larger loads of laundry.
•
Put softener into the middle section of the detergent drawer. Do not exceed the MAX mark.
•
Thick softeners may cause blockage of the drawer and should be diluted.
•
Liquid detergents can be used in all programs without prewash. In this case, insert the liquid detergent
level gauge into the sockets in section II of the detergent drawer. Use the lines on the gauge as a guide to
fill the drawer to the desired level.
Washing machine operation
1. Connect the washing machine to the power supply.
2. Turn on the water supply.
•
Open the washing machine door.
•
Spread the laundry evenly in the washing machine.
•
Gently push on the door until it clicks.
Program selection
Use the program table to select the most suitable program for your laundry.
Half load detection system
Your washing machine has a half load detection function.
If you put less than half the maximum amount of laundry in the washing machine, it will automatically set
the half load function regardless of the selected program. This means that it takes less time to complete the
selected program and uses less water and energy.
Delay start timer
•
Press the Delay start button once.
•
The "3h" indicator comes on.
•
Press the Delayed Start button repeatedly until the indicator
light with the desired delayed start setting (3, 6, 9 or 12 hours)
comes on.
•
If you have skipped the delayed start time you want to set,
keep pressing the Delay start button until the desired time is
displayed again.
•
To activate the selected delay time, press any additional
function button (except the Start / Pause button).
•
Use the START / PAUSE button to start the delayed start
countdown.
Delayed start
Summary of Contents for EWF 1053 MD
Page 2: ......