English
English
6
APPLIANCE DESCRIPTION
1. Top plate
2. Upper basket with compartments
3. Upper spray arm
4. Bottom basket
5. Lower spray arm
6. Filters
7. Rating plate
8. Control panel
9. Detergent and rinse aid dispenser
10. Cutlery basket
11. Water softener
12. The running rail of the upper basket
APPLIANCE INSTALLATION
Placing the appliance
The place where the appliance will be located must be easily accessible. It must be possible to easily put
in and remove the dishes from the dishwasher after installation. Place the appliance in a room with a room
temperature higher than 0° C.
Place the appliance close to the water inlet and outlet. Please note that it will not be possible to change its
location after connecting the appliance to the water supply / drain. Do not hold the appliance by the door or
panel.
There must be enough space around the appliance to allow the appliance to be handled comfortably during
cleaning.
Check that the water supply and drain hoses are not caught on something during the installation of the
appliance. Also make sure that the appliance does not stand on the power cord. Adjust the levelling feet of the
appliance so that it is balanced and level. Proper placement and balancing of the appliance ensures trouble‑
‑free door opening and closing. If the appliance door does not close properly, check that the appliance is on
a level surface. If necessary, adjust the balance using the adjustable feet.
Water connection
The water distribution system must be suitable for the installation of the dishwasher. We also recommend
that you install a filter at the water inlet to prevent damage to the appliance due to contamination by dirt
(sand, clay, rust, etc.) that may be in the plumbing or domestic water mains. This will prevent the dishes from
yellowing and dirt from accumulating in the appliance.
