English
English
15
•
Short programs to not include drying.
•
To speed up drying, we recommend leaving the door slightly ajar after the cycle.
•
You can access the product database for model information by loading the QR code on the energy label.
NOTE:
According to regulations 1016/2010 and 1059/2010, the energy consumption values in the Eco program
may differ. This table is in accordance with regulations 2019/2022 and 2019/2017.
SWITCHING ON THE APPLIANCE AND SELECTING A PROGRAM
Program selection and turning on the appliance
1.
Door handle
Use the door handle to open / close the door of your appliance.
2.
Delayed start and Half load button
Thanks to the delayed start function, you can delay the start time of the program by 3‑6‑9 hours. After
pressing the Delayed start button, the 3 h indicator light comes on. The 6‑9 hours lights come on with each
press. You can cancel the delayed start by pressing the button after 9 hr. lights up. Activate the function
by pressing the Start/Pause button. The countdown starts at this moment. If you would like to change the
setting once the delayed start function is already activated, you can set a new time by pressing the Start/
Pause button twice. To activate the function, press the Start/Pause button again. When the set time has
elapsed, the light goes out and the program you selected starts. If you press the Start / Pause button when
the 9‑hour light comes on, the light will go out. If you press the Start / Pause button while the delay light
is off, the selected program will start without delay. If the user switches the program selection button to
the off position after activating the delay and the program has started, the activated delay function will be
cancelled. If you press and hold button 2 for 3 seconds, the half load function is activated and the half ‑fill
light comes on. Cancel the half load function by pressing and holding the button for 2 ‑3 seconds. The
half load indicator goes off. Thanks to the half load function, you can shorten the duration of selected
programs and reduce energy and water consumption.
NOTE:
If you have used one of the functions (for example delay or half load) and then disconnected the power
supply and subsequently reconnected the appliance, this function will not be active in the next washing
program. To use this feature in the program you newly selected, you must set it up again.
3.
Start/Pause button
When you press the Start/Pause button, the program selected with the program selection button starts
and the Wash light comes on. The Start/Pause light goes off when the program starts. If you want to stop
the program, press the Start/Pause button. In this case, the light on the Start / Pause button starts flashing.
You can activate the program again by pressing the Start/Pause button once again.
4.
Rotary knob for program selection
Turn the selector to select the desired program. Turn the selector to position "0" to switch off the appliance.
5.
Setting program or delayed start monitoring indicators
You can monitor the progress of the program via the lights on the control panel.
