ECG CDR 999 DAB, Instruction Manual

Page: 19 / 200

English English
19
Repeat and shuffle from a CD
Repeat and shuffle functions:
You can repeat one track, an entire disc, or select to play tracks in random
order.
To set repeat or shuffle mode:
• Press the MENU button to scroll through “Rep A” (repeat the current track), “Rep1 ALL” (repeat the entire
disc) or “Rand” (play tracks in random order) options.
• The Repeat, Repeat All, or Shuffle symbol appears.
Programmed playback
Repeat and shuffle functions
When playing a CD, you can store a random order of up to 60 tracks that you want to play in the required order.
Saving the CD program:
• In CD stop mode, press PRESET / PROG.
• Turn the TUNING knob to select the number of the first track you want to program. T000 appears on the
display ("000" means the desired track number).
• Press the PRESET / PROG button to save this track in the program memory. The track will be saved and the
program counter will increase to "P02".
• Repeat the above two steps to save other tracks in the order of your program.
• When you are finished entering all the songs in your program press the
SCAN /
u button to mark the
played program with a star.
Deleting program
• Press STOP twice during the program playback.
• Open the disc tray door.
Listening to a USB drive
• Move the FUNCTION switch to CD / USB position.
• Press the MODE button until USB appears on the display.
• Press u to start playback.
• The control principles are the same as when playing a CD. See the previous section for details.
Note:
• Use a compatible memory storage device (up to 32 GB).
• Do not use a USB extension cable to connect a USB flash drive. Such a cable may cause interference that
may interfere with the flow of data.
• Always connect a USB flash drive directly to a USB connector without an extension cable.
• Some USB drive manufacturers do not follow the full USB 1.1 / 2.0 standard. Therefore, a small percentage
(about 5%) of USB flash drives may not be compatible with the radio.
Playing cassettes
• Set the FUNCTION selector to TAPE position.
• Press the
xZ
button to open the cassette compartment door, insert the cassette and close the door.
• Press b to start playback.
• If you want to pause the playback, press X . To resume playback press the button again.
• Stop the cassette playback by pressing
xZ
.
Fast forward/Rewind
• Press the m button until you reach the required location.
• Press the
M
button to stop the fast forward/rewind.
The buttons are automatically released at the end of the cassette and the device turns off (unless you press X ).
The buttons at the end of the tape will not be released when fast forwarding. If you want to turn off the device,
make sure the buttons are released by pressing xZ .