![background image](http://html1.mh-extra.com/html/eccotemp/l5/l5_use-and-care-manual-with-installation-instructions-for-the-installer_3866873012.webp)
PLEASE NOTE: THIS MODEL IS NOT RECOMMENDED NOR HAS IT BEEN TESTED FOR ANY PERMANENT INSTALLATIONS. THIS MODEL
IS PART OF OUR PORTABLE SERIES AND NEEDS TO BE TAKEN DOWN AND STORED IN A WARM DRY PLACE AFTER EVERY USE.
THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
12
English L5
Support:
Eccotemp.com/help-desk
Shop Online:
Eccotemp.com/products
Store Locator:
Eccotemp.com/locator
Phone: 866-356-1992 | Email: [email protected] | Address: 315 - A Industrial RD Summerville, SC 29483
The temperature of the outgoing water is dependent on the temperature of the incoming
water balanced with the amount of heat applied. Use extreme caution when setting the
outlet water temperature.
Adjustment
WARNING:
THE PORTABLE TANKLESS
WATER HEATER IS CAPABLE OF PRODUCING
SCALDING WATER TEMPERATURES!
1. With the water regulator set to high, and the gas regulator set to low,
feel the outgoing water. This is the lowest setting available.
2. To initially raise the outgoing temperature, slowly turn the gas valve
towards maximum. Adjust slowly and check the temperature often. There
will be a slight delay between increasing the gas supply and the increase
in water temperature.
3. Should the outlet water temperature need to be higher, slowly reduce
the water flow regulator until desired temperature is reached.
(Warning: Do not alter or change this water heater’s original temperature sensor)