![background image](http://html1.mh-extra.com/html/eccotemp/l5/l5_use-and-care-manual-with-installation-instructions-for-the-installer_3866873006.webp)
PLEASE NOTE: THIS MODEL IS NOT RECOMMENDED NOR HAS IT BEEN TESTED FOR ANY PERMANENT INSTALLATIONS. THIS MODEL
IS PART OF OUR PORTABLE SERIES AND NEEDS TO BE TAKEN DOWN AND STORED IN A WARM DRY PLACE AFTER EVERY USE.
THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
6
English L5
Support:
Eccotemp.com/help-desk
Shop Online:
Eccotemp.com/products
Store Locator:
Eccotemp.com/locator
Phone: 866-356-1992 | Email: [email protected] | Address: 315 - A Industrial RD Summerville, SC 29483
Functions and Features
• Water controlled automatic ignition: Water pressure between 20-80 PSI and 0.75-1.0 GPM
opens the ignition circuit for easy and convenient operation.
• Auto-cut-off protection: The auto-cut-off protection will shut the gas supply off immediately
in the event of flameout to reduce the risk of gas leakage.
• Removable drain valve to avoid water pipe and regulator damage caused by freezing water*.
• Anti-dry combustion protection: The portable tankless water heater will shut off the gas
supply in the event water stops flowing through the portable tankless water heater.
*Read the maintenance section on draining the portable tankless water heater entirely to avoid
freeze related issues.
Fuel Type
Model
Activation Flow Rate
BTU/h
Related gas pressure
Ignition
Protections
Dimensions
Pipe fittings
LPG (Liquid propane gas)
L5
25 PSI
35,000
0.4 PSI
Electric Pulse, D cell Battery Powered
(No electrical connection required)
Auto-cut off water control, automatic ignition, anti-dry
combustion
protection, over-pressure overheating and flameout
protection
11.5” x 17.0” x 4.7”
1/2” NPT, incoming/outgoing water & gas
TECHNICAL SPECIFICATIONS - PORTABLE
Gas Setting
Highest
Lowest
TEMPERATURE INCREASE PER GPM
MODEL
L5
Portable
0.5 GPM
96 °
34 °
1.0 GPM
48 °
17 °
1.5 GPM
32 °
11 °
2.0 GPM
25 °
9 °
*Temperature increases listed are based on use of the water heater under optimal conditions.
Variable factors such as incorrect or imperfect installations and varying incoming water
temperatures may yield different results.