background image

 

 
 
 

Page 

1

 of 

2

 

9065-0024 Rev J 

Interface I TT

 

Installation Instructions 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 

 

ECA • 10 Mountain View Drive • Shelton, CT  06484 • Phone: 1-800-521-3175 • Fax: 203-924-6687 

www.electri-cable.com

 

Installation Instructions 

1.  Select the location on the table surface for the installation of the Interface 
2.  Remove a section of the surface measuring 13-5/8” x 6”. 
3.  Remove the installed Clamping Bracket from the underside of the Interface 

by removing the thumb-nuts and washers 

4.  Insert the Interface through the opening in the table surface until flange is 

flat on surface 

5.  From the underside of the table surface reinstall the Clamping Bracket, 

thumb nuts and washers. Tighten until Interface is snug. 

6.  The holes alongside the data openings in bottom of Interface can be used 

for strain relieving data cables if needed. 

 

13.39 

14.27 

6.68 

2.85 

5.80 

Thumb-nuts 
& Washers 

Clamping Bracket 

Inn ovati ve Power + D ata Solutions

Reviews: