68
|
68
User Manual
Troubleshooting
FC40 Part Of Message Missing - Overspeed Error
If the message to be printed is too long for the product or the conveyor is travelling faster than the system
can print, the following warning message will be displayed in the status line of the display:
“3.02 Over Speed (Print Go)”
The following illustrates the problem:
The photocell informs the
printer that a product is in
position for printing
In response to this (if a Delay Has
been set) the printer software Will
begin to count rasters. It will not print
until the number Of rasters counted
is equal to the Delay value
Rasters are
counted but
NOT printed.
They show
here only for
example
Delay
started here
Delay would end
here
Delay
interrupted
here by next
product
Con
vey
or d
irec
tion
Con
vey
or d
irec
tion
PRINTHEAD
PHOTOCELL
However, if another product arrives
before the count is completed, the
Count is restarted and nothing will
print. If this situation is allowed to
continue, nothing will ever be printed
EJ107
