Chengdu Ebyte Electronic Technology Co.,Ltd.
NA611-S & NA611-SA User Manual
Copyright ©2012–2022
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
第
29
页
4. Configure the link parameters, the factory default is server mode (TCPS), the default IP (192.168.1.1), and the
port is 8888;
5. Turn off other advanced modes, the factory default is turned off;
4.3.3. HTTP mode
When using this function, you only need to select and start a trigger request to get the resources responded by the
server. You don't need to care about the complex HTTP protocol layer. You can choose whether to output the HTTP
header. HTTP supports two common request methods: POST and GET;
Request path (HTTP URL): configurable up to 128 bytes;
Request header (HEADER): The maximum configuration is 128 bytes, and the supported data can contain escape
characters such as "\r\n";
When in HTTP mode
HTTP transmission mode: It is divided into POST and GET methods. When the HTTP information is set, the
information in the information area is directly written, and the device will automatically seal the data packet before
uploading to the network.
