Chengdu Ebyte Electronic Technology Co.,Ltd.
NA611-S & NA611-SA User Manual
Copyright ©2012–2022
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
第
18
页
6. Configure the link parameters, the factory default is server mode (TCPS), the IP is dynamically obtained by
the device, here is 192.168.10.152, and the local port is modified to 8888;
7. Click Save to restart the device;
2.6. STA mode communication test
Keep the computer and the device connected to the same router (the connection is successful and LINKA is
always on), the computer uses a dynamic IP (for the configuration method, refer to 2.4 AP mode communication
test), open the network assistant, and connect to the device server (192.168.10.152:8888, obtain the IP according to
the actual device) If the connection is successful, LINKB is always on), if you cannot connect according to the
above configuration, it is recommended to turn off the computer firewall;
The communication test uses the serial assistant to send "EBYTE_NA6111_S_TEST_UART", the network
assistant
receives
"EBYTE_NA6111_S_TEST_UART",
the
network
assistant
sends
